Contact
phone 541.296.4562 • toll free 1.800.548.4502
fax 541.296.3954
email info@uswatermaker.com

Workboat

Workboat Series

The USWATERMAKER Workboat Series is a frame mounted semi-modular or modular unit designed for all vessels. This rugged but attractive series can be installed in workboats, fishing vessels, and tugs, but is more than suitable for luxury yachts or land based applications where commercial systems are needed.

Workboat Brochure

Production Capacity (GPD) 500 to 4000 GPD
Raw Water Flow 2.3 to 7.4 GPM
Pre-filter Commercial 5 & 25 Micron
Motor TEFC Close Coupled 1.5 HP, 3 HP or 5 HP
Phase Single or Three Phase
Volts 115 or 230 (1.5 HP Single Phase)  12.8 or 6.4 Amps
230 (3 HP Single Phase) 13.2 Amps
208, 230 or 460 (3 HP Three Phase) 9, 8.6 or 4.3 Amps
208, 230 or 460 (5 HP Three Phase) 15, 13.2 or 6.6 Amps
Frame Dimensions 14.5” High x 26” Wide x 18” Deep
Weight Approximately 250 Lbs
High Pressure Pump CAT PUMPS®3CP or 5CP, 316 Stainless Steel Pump Head
High Pressure Control Adjustable Pressure Regulator and Safety Switch
Low Pressure Control Low Pressure Safety Switch
Pressure Vessels Composite
Membranes Seawater 2540 or 4040
Operating Pressures 800 PSI
Feed Pump Ampco NAB Centrifugal Pump
Feed Pressure 2 PSI Minimum
Raw Water Connection ¾” Hose Barb
Waste Water Connection ¾” Hose Barb, ½” NPT
Product Water Connection ¾” Hose Barb, ½” NPT
Fresh Water Flush ½” Hose Barb, ¼” NPT